Avatar

Support

  • Total activity 25
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 0

Activity overview

Latest activity by Support
  • Avatar

    Support created an article,

    Support structures

    Support structures – are added by a model designer or generated by slicer (Simplify3D). These structures are built to keep parts of the model hanging in the air. Properly printed support is not a p...

  • Avatar

    Support created an article,

    Skirt

    Skirt – additional lines printed around the model within a few mm of it at the beginning of the printing process. Skirt is not an integral part of the model. The skirts task is to initiate and stab...

  • Avatar

    Support created an article,

    Raft

    Raft – a method of increasing the adhesion of printout to the heatbed. Raft is a platform consisted of layers, alternately added one by one. The platform is generated by the slicer under the printe...

  • Avatar

    Support created an article,

    G - code

    G - code – a standardized programming language designed for CAM machine control. In simple instructions, a G-Code sequence contains the exact commands for the machine, eg. in which way, how fast an...

  • Avatar

    Support created an article,

    3DGence ONE in the Volswagen Passat advertisement

    Source: Timecode film production

  • Avatar

    Support created an article,

    3DGence ONE unboxing

    Source: PRIM

  • Avatar

    Support created an article,

    3DGence ONE - the future is here

    Source: 3DGence

  • Avatar

    Support created an article,

    Mold making with 3DGence ONE

    Source: Mikroprint, 3DGence business partner

  • Avatar

    Support created an article,

    Filament

    Filament - popular term for any material that can be used in the process of printing in FFF technology. Filament is a thermoplastic material (PLA, ABS, PET, HIPS etc.) in a form of a wire wound on ...

  • Avatar

    Support created an article,

    Slicing

    Slicing – the process of generating paths and instructions for the 3D printer (G-Code) from a three-dimensional model. Print parameters are selected in the program type of slicer. We can distinguis...