In order to stop the printout the user should press STOP button. The printout restarts after pressing the START button, not matter if the STOP button was pressed once or twice.
STOP button has 2 functions:
- stopping the printout by single pressing,
- stopping the printout and moving the hotend towards base position of X and Y axis by double pressing
This function allows additional actions with the printout such as putting the nut or other element into the printout, changing filament color or replacing empty spool.
However we recommend using filament changing assistant by chosing ‘Filament change’ from the menu.
Remember that any added element should not stick out from the printout otherwise the hotend may collide with it and get damage.
While replacing the filament for another we recommend to stop the printout during the process of printing of the infill, that will decrease the risk of potential defect on the surface of the model.